Green Clean Free Magnifer Promotion for Sensor Cleaning Kits

Austrian manufacturer Green Clean are supplying a set of “Clip & Flip Magnifying Glasses” Free of charge with all Sensor Cleaning Kits until 31st of December 2009!

The Green Clean “Clip & Flip Magnifying Glasses” are a great help for the photographer while cleaning sensors or other sensitive surfaces! Clip & Flip is a pair of magnifying glasses that attach to the brim of caps, visors and hats. The crystal-clear acrylic lenses give a sharp, distortion free magnified view that allows the user to see the finest details with ease.
Retail price £5.95 + Vat.

Green Clean Clip & Flip:

• Magnification: 1.75x (+3.00 Dioptres)
• MAGNIFIES WHILE CLEANING SENSORS! Not just before or after cleaning process.
• Has countless other applications: Model Making, repair work and hobbies
• Includes Protective Soft Pouch
• Small & lightweight, easy to carry, always available in the studio or on location

Three Green Clean Sensor Cleaning Kits are available:
SC-4000 Full Size Sensor Cleaning Kit at £47.50 + Vat contains:

• 1 x Hi Tech Air Power 400 ml aerosol can
• 1 x Mini Vac vacuum attachment
• 3 x Pick Up special trumped shaped nozzle
• 3 x Wet & Dry sweepers, 24 mm width (double sachet)
• 1 x FREE Clip & Flip Magnifying Glasses

SC-4200 Small Size Sensor Cleaning Kit at £47.50 + Vat contains:

• 1 x Hi Tech Air Power 400 ml aerosol can
• 1 x Mini Vac vacuum attachment
• 3 x Pick Up special trumped shaped nozzle
• 3 x Wet & Dry sweepers, 15 mm width (double sachet)
• 1 x FREE Clip & Flip Magnifying Glasses

SC-4100 Traveller Sensor Cleaning Kit at £27.50 + Vat contains:

• 1 x HiTech Air Power 150 ml aerosol can
• 1 x Mini Vac vacuum attachment
• 3 x Pick Up special trumped shaped nozzle
• 1 x FREE Clip & Flip Magnifying Glasses

This is how the Green Clean sensor system works:

STAGE ONE:
Safe & easy Contact-free!! Vacuum action Economical
The first and most important part of the cleaning system, the Mini Vac, uses an aerosol to create suction and works “contact-free” allowing the user to gently remove dust and friction particles from the sensor and mirror box.
The Pick-Up, a flexible tube with a trumpet shaped end, which is abrasion free and non-conductive, is used to lift loose particles, dust, abrasions etc off the sensor surface, mirror-box and the rear of the lens barrel. The dirt is collected in a clear collection tube. This contact-free process (!!) is all that is needed to clean the sensor in the majority of cases and alleviates the need for wipes, brushes and other implements that work by making contact with the sensor surface.

STAGE TWO:
Only used when necessary Removes stains & “welded-on” dust
“Wet Sweeper” with precise dosage of dissolving liquid
“Dry Sweeper” with pre-treated textile

The Wet & Dry Sweepers come in a sealed double sachet and are available in TWO sizes: SC-4060-3 (24 mm width) for full size sensors and SC-4070-3 (15 mm) for small size sensors. The Wet Sweeper has a pre-soaked foam tip with just the right amount of solution needed to dissolve any stubborn dirt or stains, which is then lifted off with the Dry Sweeper. The projecting edges of the Dry Sweeper’s pre-treated textile are excellent for cleaning right into the corners of the sensor, leaving a pristine sensor surface!

Now available from Green Clean dealers!

For more information visit:
www.flaghead.co.uk

Reader feedback:

Discuss this story: